Prepare tools first as below.
Step 1 Remove the steel plate which is under the panel position.
Step 2 Remove the lever of the machine structure.
Step 3 Slowly and carefully push the air pump into the equipment's internal.
Step 4 Connect the air pump with these two pumps and lock them tightly.
Normally, the right is the suction pipe, and the left is the exhaust pipe.
Step 5 If the air pump and the position of the pipe orifice are not connected,
the air pump can be padded to adjust the position.
Step 6 Remove the steel plate of the first part which is at the left side of the machine.
Step 7 Connect the plastic pipe to the corresponding interface of the air pump
as shown in the video.
Step 8 Power-on.
